🔥 Dry Firewood – How to Heat Efficiently and Economically?

Heating your home with wet wood wastes energy evaporating moisture, damages the
firebox and creates dangerous soot. Tammaru Farm's practical guide shows you how to
achieve maximum heat output with minimal fuel cost.

🌲 Why Is Dry Firewood the Only Right Choice?

  • Maximum heat output: Dry wood ignites within seconds, burns at high
    temperature and releases all its energy into the room, not up the chimney.
  • 🛠️ Clean firebox and chimney: Burning produces no tar or excess soot. Extends the
    life of your fireplace and chimney by up to two times
    .
  • 🌍 Environmental friendliness: Complete combustion means minimal smoke and
    fewer harmful gases released into the air.

🪵 Drying Time and Characteristics by Wood Species

Quality firewood must have a moisture content below 18–20%. Drying speed depends
directly on the wood species and how it's stored:

  • 🍂 Alder and black alder: Dry quickly. Wood split in spring is ready to use by autumn.
    Ideal fireplace wood.
  • 💨 Aspen: Dries properly over two summers. Burns with a clean flame and helps clear
    soot from the flue
    .
  • 🌳 Birch: Needs at least 12–18 months to dry. Dense wood that gives very long-lasting
    warmth
    .

💡 Tip: Stack logs in early spring bark side down, sheltered from rain but in a sunny,
wind-exposed spot.

Checklist: How to Heat a Fireplace or Stove Correctly

  1. 🌡️ Bring the wood indoors: In autumn and winter, bring firewood into a warm room
    24–48 hours before heating. This lowers the wood's surface moisture to around
    10–15%
    , ensuring instant, clean ignition.
  2. 🧹 Clean the firebox: Remove excess ash from the grate to ensure an even oxygen flow
    for combustion.
  3. 📐 Stack the wood correctly: Stack logs horizontally, leaving air gaps between them.
    At least 1/3 of the firebox must stay free at the top.
  4. 🔝 Always light from the top: Use natural firelighters or kindling on top of birch bark.
    Top-lighting gives 80% cleaner, smoke-free combustion.
  5. 💨 Regulate the airflow: Keep the damper and air vents fully open at the start of
    combustion. Once the fire burns steadily, reduce the airflow, but don't close it
    completely until the wood has charred.

📦 Order Dry Firewood in Mesh Bags Directly From Tammaru Farm

Don't waste time drying wood yourself. Tammaru Farm's firewood is ready to use
immediately, tested for moisture and conveniently packaged.

  • Convenient 20L, 40L and 60L mesh bags – easy to transport and store.
  • Precise, fast delivery straight to your yard or shed.

👉 See the dry firewood price list and order here

📞 +372 52 388 52